Product Availability: 10 item(s)
Water Based Deck Adhesive 2L
Water-based adhesive for bonding compatible EPDM roofing membranes to absorbent timber roof decks, including suitable plywood and OSB. Supplied in a 2L container for use across the main horizontal roof area.
Read more
EPDM Water-Based Deck Adhesive – 2L is designed for bonding compatible EPDM rubber roofing membranes to absorbent timber roof decks, including suitable unsealed plywood and OSB boards.
Designed for the main horizontal roof area, this adhesive is applied using a roller to achieve an even coating. Surfaces must be clean, dry and free from dust, grease and loose material before application. Follow the manufacturer’s instructions for adhesive application and membrane placement.
Suitable for sheds, garages, garden rooms and extensions, the 2L container provides a convenient pack size for smaller EPDM roofing projects.
Use the roofing system’s specified contact bonding adhesive around roof perimeters, upstands and other areas requiring a different bonding method. Always check membrane and substrate compatibility before use.
Key Benefits
- Water-based formulation
- Designed for compatible EPDM roofing membranes
- Suitable for absorbent timber roof decks
- Easy roller application
- Suitable for the main horizontal roof area
- Convenient 2L container for smaller roofing projects
Typical Applications
- Bonding EPDM membranes to suitable plywood roof decks
- Bonding EPDM membranes to suitable absorbent OSB boards
- Shed roofs
- Garage roofs
- Garden room roofs
- Extension roofs
- Main horizontal areas of compatible EPDM roofing systems
Technical Specification
Product type: Water-based EPDM deck adhesive
Container size: 2L
Suitable membrane: Compatible EPDM roofing membrane
Suitable substrates: Absorbent, unsealed plywood, OSB and suitable timber roof decks
Application area: Main horizontal roof deck
Application method: Roller applied, following the manufacturer’s instructions
Surface condition: Clean, dry and free from dust, grease and loose material
Coverage: Approximately 8–10 m² per 2L container, depending on substrate condition and absorbency
Perimeters and upstands: Use the roofing system’s specified contact bonding adhesive
Storage: Protect from frost and follow the manufacturer’s storage instructions
Secure Shopping
Fast Delivery
Wide Range of Products
Product Warranty
