Product Availability: 10 item(s)
EPDM Water-Based Deck Adhesive – 2.5L
Water-based adhesive for bonding EPDM roofing membrane to absorbent timber roof decks. The 2.5L container covers approximately 10–12m² when applied to dry timber.
Read more
EPDM Water-Based Deck Adhesive provides a strong and reliable bond between EPDM roofing membrane and absorbent timber roof decks, including suitable plywood and OSB boards.
Designed for use across the main flat area of the roof, the adhesive can be applied evenly to a clean, dry deck using a roller. The EPDM membrane is installed while the adhesive remains wet, allowing it to be positioned and smoothed into place.
The water-based, low-odour formulation makes application straightforward for professional roofers and competent DIY installers. A 2.5L container provides approximate coverage of 10–12m² on dry timber, depending on the condition and absorbency of the surface.
This adhesive is intended for the main roof deck only. Use a suitable EPDM contact bonding adhesive around roof perimeters, upstands and other non-absorbent or vertical surfaces.
Key Benefits
- Developed for bonding EPDM membrane to timber roof decks
- Water-based and low-odour formulation
- Easy application using a roller
- Allows the membrane to be positioned while the adhesive is wet
- Suitable for absorbent plywood and OSB roof decks
- Approximate coverage of 10–12m²
- Suitable for professional and competent DIY installation
Typical Applications
- EPDM flat roofing systems
- Main flat area of timber roof decks
- Plywood roof decks
- Suitable OSB roof decks
- Garages and extensions
- Garden rooms and sheds
- Domestic and commercial flat roofs
Technical Specification
Product type: Water-based EPDM deck adhesive
Container size: 2.5L
Application: Roller applied
Approximate coverage: 10–12m² on dry timber
Suitable membrane: EPDM roofing membrane
Suitable substrates: Absorbent plywood, OSB and suitable timber roof decks
Application area: Main flat roof deck
Surface condition: Clean, dry and free from dust, grease and loose material
Installation method: EPDM membrane laid into wet adhesive
Not suitable for: Non-absorbent decks, roof perimeters, upstands or vertical surfaces
Storage: Protect from frost and keep the container closed when not in use
Secure Shopping
Fast Delivery
Wide Range of Products
Product Warranty
